MeraTalk
Wholesale VoIP Rates

Wholesale VoIP Rates: CLI & Non-CLI Termination Pricing

What actually sets a per-minute termination rate — route type, destination, billing increment and committed volume — and how to read a rate deck before you move traffic onto it.

200+ destinations
Tier-1 CLI routes
99.99% uptime SLA
1/1 billing available
What comes back
  • Destination-level rates for the countries you actually send to
  • CLI and non-CLI priced separately, with the billing increment stated
  • A reply from the carrier team within one business day
See the full wholesale VoIP service
Get a Custom Rate Sheet

Talk to our Wholesale VoIP team

Tell us your traffic requirements — we reply within one business day.

Overview

What Are Wholesale VoIP Termination Rates?

The per-minute price a carrier charges to complete — to terminate — a call at its destination.

When your softswitch or SBC hands a call to a wholesale carrier, that carrier routes it into the destination network and bills you for the connected call time. Nothing else is being sold — no seats, no features, no helpdesk. That is the whole difference from retail VoIP, which bundles all of it into a monthly subscription per seat.

Those prices reach you as a rate deck — an A-Z rate sheet listing every destination dial code you can reach, with a separate price for each way of reaching it. Reading one properly is most of the job, and its six columns are where the money hides. The wider mechanics are set out in the wholesale voice pillar.

Anatomy of an A-Z rate deck
Destination
Country and network — mobile and fixed priced separately
Dial code
The prefix the rate applies to, longest match wins
CLI rate
Per-minute price with the calling number presented
Non-CLI rate
Per-minute price with no number presented
Billing increment
Minimum chargeable unit, then the step after it
Effective date
When the row takes over from the one before it
Termination Money out

What you pay to route calls off your platform. The dominant cost line for most wholesale operations — and what this page covers.

Origination Money in

What you charge for inbound traffic on DIDs you control. A revenue line, priced per number as well as per minute.

Route classification

Route Types: CLI, Non-CLI & CC

Three route types exist in wholesale VoIP, and the one you pick sets your per-minute rate, your answer rate and your regulatory exposure in a single decision.

CLI
Caller Line Identification

Passes the caller number to the destination

  • Highest answer-seizure ratios of the three types
  • Prices at a premium over non-CLI on the same destination
  • Required for outbound sales, UCaaS and any regulated outbound traffic
Non-CLI
Anonymous

Does not present a calling number

  • Lower answer-seizure ratios — recipients see no number
  • Meaningfully cheaper per minute than CLI
  • Suits one-time passcodes, alerts and automated notifications
CC
Calling Card

Prepaid calling-card routes

  • Lower average call duration expectations by design
  • Usually quoted on 30/6 or 60/60 increments
  • Built for telecom retail and prepaid resale, not enterprise voice

Choosing between them per destination rather than per account is covered in the termination buyer’s guide.

Pricing factors

What Determines Your Termination Rate

No two destinations price the same way. Six factors move the per-minute rate on any given route.

01

Destination country & network

In-country termination fees vary by orders of magnitude between competitive and monopoly markets. Western Europe and North America sit at the cheap end; parts of West Africa and satellite-dependent island networks at the expensive end.

02

Fixed vs. mobile termination

Mobile termination costs several times more than fixed line on the same destination. Regulators set mobile termination rates in most markets, and those changes flow straight into your rate deck whether you expected them or not.

03

Route quality class

CLI premium routes carry a quality premium. Cheaper classes deliver lower answer rates and shorter calls, so the cheapest rate is rarely the lowest effective cost once failed attempts are counted.

04

Monthly traffic volume

Volume commitments unlock tiered discounts. A clean, predictable traffic profile helps as much as the raw number — carriers price risk, and stable high-volume traffic is low risk.

05

Billing increment

The increment sets your minimum chargeable unit. On short-duration traffic, per-second billing beats a 30-second minimum at the same nominal rate — always negotiate the increment alongside the rate, never after it.

06

STIR/SHAKEN & regulation

A-attestation on US-bound traffic adds a small regulatory overhead. Markets that levy per-call regulatory fees add a flat surcharge on top of the per-minute rate, which a headline A-Z deck will not show you.

Quality metrics

The Metrics That Decide Real Cost Per Minute

The cheapest rate is rarely the lowest effective cost. A route with a poor answer rate can cost more per completed call than a premium one. Track these five on every carrier relationship.

ASR
Answer Seizure Ratio
Share of call attempts answered
Target60–80%
WarningBelow 45%
ACD
Average Call Duration
Average connected call time
TargetAbove 90 sec
WarningBelow 45 sec
PDD
Post-Dial Delay
Seconds from dial to ring tone
TargetUnder 1.5 sec
WarningAbove 4 sec
MOS
Mean Opinion Score
Perceived voice quality (1–5)
Target4.0 or higher
WarningBelow 3.6
FAS
False Answer Supervision
Billing that starts before answer
TargetZero tolerance
WarningAny FAS at all

Test before you commit. Ask any carrier for a short test window on a new route before production traffic moves. A route showing a poor answer-seizure ratio, or any false answer supervision at all, should be rejected whatever its per-minute rate says.

Billing increments

The Increment Is a Hidden Rate Variable

Your billing increment is the minimum unit of time you are charged for. Two routes quoted at an identical per-minute rate can cost very differently once the increment is applied — and the gap widens the shorter your calls are.

1/1
Recommended

Per-second billing from the first second. The most cost-efficient increment for any traffic profile, and the one to ask for first.

6/6
Acceptable

Six-second minimum in six-second steps. The common middle ground, and what most carriers will offer without being pushed.

30/6
Avoid

Thirty-second minimum, then six-second steps. Inflates the effective cost of short calls well above the nominal rate.

60/60
Never

Full-minute rounding on every call. Never accept it for outbound sales or contact centre traffic — a 20-second call bills as sixty.

Volume pricing

How Volume Changes What You Pay

Most wholesale carriers price in tiers — you commit to a minimum monthly volume in exchange for a lower per-minute rate, and the commercial terms around the rate improve alongside it.

10,000 – 49,999
RateStandard rates
SheetStandard A-Z deck
AccountShared support
50,000 – 199,999
RateTiered discount
SheetCustom rate sheet
AccountShared support
200,000 – 499,999
RateDeeper tier
SheetDestination-level negotiation
AccountDedicated AM
500,000+
RateNegotiated (NDA)
SheetCustom NDA rate deck
AccountDedicated AM + NOC

Tiers are indicative. Rates are quoted in USD on a destination-level rate sheet and are exclusive of any taxes or regulatory fees that apply in your jurisdiction.

Provider checklist

How to Choose a Wholesale VoIP Carrier

Price is one line in the contract. Work through these seven before any meaningful traffic volume moves.

1

Rate transparency

Can the carrier hand you a full A-Z rate deck with explicit CLI, non-CLI and mobile rates per destination? Surcharges that only surface on the invoice are a red flag.

2

FAS-free commitment in writing

Ask for a written undertaking that calls are not billed before answer supervision, and for the remedy when it happens. A verbal assurance is not a remedy.

3

STIR/SHAKEN compliance

For US-bound traffic, A-attestation is increasingly expected. Confirm the carrier signs calls at the origination point rather than passing unsigned traffic downstream.

4

Test batch before commitment

Run several hundred calls to your key destinations and inspect ASR, PDD and MOS yourself before any production traffic moves.

5

Rate-change notification policy

Rates in volatile markets can move weekly. Ask how much notice you get, in writing, and whether changes are pushed to you or left for you to discover.

6

Billing increment

Negotiate 1/1 or 6/6 at the same time as the rate. Never accept 60/60 for sales or contact centre traffic.

7

24/7 NOC access

Confirm direct access to a Network Operations Centre for route failures and quality degradation — not only a ticket portal that queues behind business hours.

If you are connecting your own PBX or softswitch rather than buying minutes alone, start with SIP trunking.

Why MeraTalk

Why Carriers Buy Their Termination Here

The rate matters. So does whether the route behind it is the one you were sold.

Direct Tier-1 interconnects

Carrier-grade SIP termination over direct peering agreements — no grey routes and no undisclosed intermediaries between you and the terminating network.

FCC 214 & 499 licensed

Active FCC carrier licences and Robocall Mitigation Database registration, verifiable in the FCC public registry rather than asserted on a slide.

Destination-level rate decks

Full A-Z rate sheets on request, covering the destinations you actually send to, with CLI and non-CLI priced separately and no bundled fees folded in.

99.99% uptime SLA

Redundant SBC infrastructure with automatic route failover, continuous route-quality testing, and a 24/7 NOC staffed by engineers rather than a ticket queue.

200+ destinations, A-Z

Fixed, mobile, special services and satellite coverage, with CLI and non-CLI options on all major destinations and least cost routing inside your chosen quality class.

Prepaid or postpaid

Billing that matches your cash-flow cycle. Prepaid settles against a balance; postpaid runs on agreed terms after a credit review, and the two price differently.

Get a custom rate sheet +1 914 449 5889

Send your key destinations and expected monthly volume and the carrier team will come back with a rate deck written for that traffic.

FAQ

Wholesale VoIP Rates FAQ

Can't find what you need? Our team usually replies in under 4 minutes during business hours.

Still have questions?

Wholesale VoIP termination rates are the per-minute prices a carrier charges to complete a call at its destination. They vary by country, network type (fixed or mobile), route quality class and monthly traffic volume. Because wholesale pricing covers termination alone — no bundled minutes, seats, features or helpdesk — it typically lands far below retail VoIP pricing for the same traffic.

CLI routes pass the caller's number through to the recipient, which lifts answer rates and is required wherever caller identification is regulated. Non-CLI routes do not present a calling number, cost meaningfully less per minute, and reach lower answer-seizure ratios — fine for one-time passcodes and automated alerts, unsuitable for outbound sales or any regulated outbound environment.

Negotiate 1/1 — per-second billing from the first second — wherever the carrier offers it. On short-duration traffic it is materially cheaper than 30/6 at the same nominal per-minute rate, because you stop paying for seconds you never used. 6/6 is a reasonable middle ground. Avoid 30/6, and do not accept 60/60 minute rounding for outbound sales or contact centre traffic.

Six factors move the per-minute rate: the destination country and terminating network, whether the number is fixed or mobile (mobile terminates higher), the route quality class, your committed monthly volume, the billing increment, and regulatory overhead such as STIR/SHAKEN attestation on US-bound traffic or per-call fees in certain markets.

Five: ASR (answer-seizure ratio), ACD (average call duration), PDD (post-dial delay), MOS (mean opinion score) and FAS (false answer supervision). The first four tell you whether a route is performing; FAS tells you whether you are being billed for calls that were never answered. Any FAS at all is a reason to move the route, whatever the rate.

Most carriers refresh their A-Z rate decks monthly. Volatile markets — parts of Africa, Latin America and Southeast Asia — can move far more often than that, because regulated mobile termination rates and upstream carrier agreements change on their own schedule. Ask any prospective carrier for its rate-change notification policy in writing before you commit traffic.

Commit to a monthly volume you can actually deliver, so the carrier can price a predictable traffic profile rather than a hopeful one. Negotiate 1/1 or 6/6 billing. Ask for destination-specific rates on the routes you really send to instead of a generic A-Z deck. Test route quality before you commit, and audit your CDRs monthly for FAS and charges you cannot explain.

Get Started Today

Sign up today.
Take your first call before lunch.

Same product, same support, same compliance on every plan. The AI receptionist is included from day one.

Free porting in and outNo credit card to startCancel anytime